Boom End Flush Valves
Wilger Boom End Flush Valves are engineered for sprayers. With the perfect full drain, compact and chemically resistant flush valve, it fits perfectly with today’s sprayers.
The new COMBO-RATE boom end flush valve steps further in eliminating any deadspace in the boom by having the last nozzle body directly overtop, a recirculating port included, with the original full-drain and ultra compact flush valve.
| Component | Material |
|---|---|
| Flush Valve Body | Glass-reinforced Polypropylene |
| O-rings | VITON® (Standard) |
| Hi-Lo Screw | Stainless Steel |
| Adapter Body | Glass-reinforced Polypropylene |
Boom End Flush Valve Configurations
There are four different configurations of the boom end flush valve, tailoring each to the exact specifications needed to work perfectly.
Long/Short Handle Versions
We make two versions of each valve to accomodate a more compact handle (typically a -V0 part#), as well as a long handle version (a -LV0 part #).
The compact handle is convenient on boom ends that might have brush contact or have any risk of being caught on something. The long handle is for easier opening.
Quick Nut SST
Flush Valve
Compact: Part# 25175-V0
Long Handle: Part# 25175-LV0
The QN SST flush valve fits onto Quick Nut Stainless Steel Tube male thread fittings.
Compatible with 1-1/4″ NPT.
Noticeably longer thread than the TWS valve. [Thread width/length is 7/8″]
1″ NPT Flush Valve
[with QNSST valve]
Compact: Part# 25176-V0
Long Handle: Part# 25176-LV0
QNSST flush valve that fits onto a 1″ NPT with an attached adapter.
Thread width/length is 7/8″ + the adapter length.
Thread is compatible with 1″ NPT.
Case Thin Wall Steel (TWS)
Flush Valve
Compact: Part# 41402-V0
Long Handle: Part# 41402-LV0
The TWS flush valve fits onto Case Thin walled steel boom fittings.
Noticeably shorter thread than the QN SST valve.
[Thread width/length is 5/8″]
1″ NPT Flush Valve
[with TWS valve]
Compact: Part# 41403-V0
Long Handle: Part# 41403-LV0
TWS flush valve that fits onto a 1″ NPT with an attached adapter.
Thread width/length is 5/8″ + the adapter length.
Thread is compatible with 1″ NPT.
1″ Flange to QN SST BEFV
#27351-00
Wilger manufactures a flange to 1″ QNSST Boom End Flush Valve Thread (1-1/4″ O-ring thread)
Simply thread onto a boom end flush valve (with #25160-02 o-ring between), and attach to any common 1″ flange fitting.
1″ Flange to TWS BEFV
#27352-00
Wilger manufactures a flange to 1″ Case Thin-wall Stainless (TWS) Boom End Flush Valve Thread (Acme thread)
Simply thread onto a boom end flush valve (with #25160-02 o-ring between), and attach to any common 1″ flange fitting.
COMBO-RATE Boom End Flush Valve
A boom end flush valve that perfectly incorporates the last nozzle body on a boom.
The CR BEFV attaches to any common 1″ flange fitting to provide a full ID flush valve, two Combo-Rate stacking nozzle body ports, as well as a port on the top for full recirculation flow kits (option for plugged off if recirculation is not required)
