Quick Nut Stainless Steel Tube
Fluid Supply System
The Quick Nut Stainless Steel Tube System (QN SST) is the best engineered sprayer fluid supply system available in the market today.
It pairs low cost/weight with easier maintenance/assembly for a hassle free experience, letting you spray longer.
Component | Material |
---|---|
Tube | Stainless Steel |
Connection Fittings | Glass-reinforced Polypropylene |
O-rings | Buna-N & Viton® |
Quick Nut Stainless Steel Tube Benefits
1/2″ & 1″ Pipe Sizes Available
QN SST comes in both two sizes:
1/2″ (0.84″ OD)
1″ (1.315″ OD)
Plumbing fittings for both sizes.
Less Pressure Drop
With the large inside diameter, there is more flow capacity while maintaining the same outside dimension as 1″ pipe.
Best in Class Weight Reduction
1″ SST weighs 23% of Sch40 pipe
1″ SSt weighs 66% of aluminum
1/2″ SST weighs 28% of Sch40 pipe
1/2″ SST weighs 80% of aluminum
SST retains structural strength of stainless steel
Pre-punched Holes
SST has pre-punched holes for the required hole size and spacing.
Unpunched SST is available for plumbing and recirculating boom systems.
No Threaded Boom Ends
Easier maintenance as there are no burrs from threading plugging nozzles
All fittings are o-ring sealed, so no thread sealing is required.
Boom Clamps
Compact & durable boom clamps make boom installation and removal easy
Quick Nut SST Fitting Benefits
1/2″ & 1″ SST Fittings
Fittings are available in two sizes:
1/2″ for 0.84″ outside diameter pipe
1″ for 1.315″ outside diameter pipe
No Tools Needed
Since all fittings are o-ring sealed, there isn’t any need for specialized tools or equipment to take apart or put QN SST fittings together.
Less Pressure Drop
All of the QN SST sweep tee and elbow fittings keep the largest inside diameter possible, reducing pressure loss through the plumbing.
No Threaded Boom Ends
Easier maintenance as there are no burrs from threading plugging nozzles
All fittings are o-ring sealed, so no thread sealing is required.
Utility Fittings
Wilger makes a number of fittings from site glasses, threaded end caps [for pressures gauges] to boom end flush valves, which provide more function than a standard plug cap.
Boom Clamps
Compact & durable boom clamps make boom installation and removal easy
Boom End Flush Valves
Boom End Flush Valves
Wilger’s boom end flush valves are made to fit QN SST booms; however, there are adapters to have them fit on 1″ NPT pipe thread.
For Quick-Nut SST booms, use #25175-V0
For 1″ NPT booms, use #25176-V0