COMBO-JET® Nozzle Bodies
COMBO-JET® nozzle bodies are a compact, durable swivel body that is available with up to 3 outlets, in both COMBO-JET®/radialock tip-cap & square lug outlet varieties.
Main Product Benefits
Combo-Jet® (CJ) nozzle bodies allow for an easy swivel to switch between (up to 3) tip-caps without having to take caps off. This means they are safer and easier to handle in the field.
CJ nozzles bodies are compatible with all of the industries’ Pulse Width Modulation (PWM) system solenoids as well. (i.e. Capstan Sharpshooter®, Case AimCommand®, Raven Hawkeye®) This makes CJ nozzle bodies a very cost effective choice for new sprayers or aftermarket replacement parts.
COMBO-JET® Nozzle bodies are fully compatible with COMBO-JET® radialock tip caps. Wilger also manufacturers swivel bodies with square lug (i.e. TeeJet/Hypro/Green Leaf) nozzle outlet options.
Diaphragm Check Valve & Shut-off Module Options
All Combo-Jet® nozzle bodies come standard with diaphragm check valves, but can easily be switched for different modules to customize a sprayer:
Diaphragm check valve
Available in 4PSI, 10PSI (standard) and 15PSI versions
Fairprene diaphragms standard. VITON® diaphragms available.
Manual ON/OFF check valve
When ‘ON’, it acts as a 10PSI* check valve.
When ‘OFF’, it turns off the flow completely to that body (*4PSI/10PSI/15PSI options are available)
Fairprene diaphragms standard. VITON® diaphragms available.
Air-Off check valve
Acts as a standard diaphragm check valve, but when an attached air line is charged, it will turn OFF the flow to that body.
Fairprene diaphragms standard. VITON® diaphragms available.
Open thread option
Sharing the same thread as all COMBO-RATE® modules, the open thread is compatible with PWM or other precision ag systems.
COMBO-JET® Nozzle Body Design
COMBO-JET® nozzle bodies are made out of glass-reinforced polypropylene, which provides the ultimate chemical resistance and durability in the field.
Slotted Inlet for Debris Cleanout
CJ nozzle bodies have a slotted inlet that provide full drain on even the thinnest booms, which reduces chemical residue or debris to get stuck in the boom.
3/4″ & 1″ Pipe Sizes Available
COMBO-JET® nozzle bodies come with standard 3/8″ inlets, in both 3/4″ and 1″ pipe sizes.
Hi-Lo Screwed Hinged Clamp
COMBO-JET® nozzle bodies have a Hi-Lo screwed hinge clamp, available in smooth and bolt mount options, for easy installation.
Radialock Cap Advantage
COMBO-JET® nozzle bodies use a quarter turn radialock tip cap, for better sealing under pressure. Compatible with all COMBO-JET® spray tips.
KWIKSTOP™ Raised Nozzle Inlets
KWIKSTOP™ raised inlets passively remove air that is trapped in the top of a boom, significantly reducing spray run-on.
Square Lug Outlets
