With the Engenia™ herbicide, BASF is working with spray tip manufacturers to ensure spray tips offered in the market are suitable for their herbicides. With new formulations of crop protection chemicals, it is increasingly important that the correct spray tip is used for optimum coverage and drift control.

NOTE: For the most current information on approved nozzles for use with Engenia herbicide on dicamba-tolerant crops, visit www.engeniatankmix.com. For a reference of some other label information, it can be retrieved from HERE (BASF Engenia™ website).
Engenia™ Herbicide on Main Label Applications
(on Non-Dicamba-Tolerant Crops)

The below information is specific to the main chemical label and applications, relating to the use of Engenia™ Herbicide on non-dicamba-tolerant crops ONLY. For information on applying Engenia™ Herbicide on dicamba-tolerant crops, reference the supplementary label or the information at www.engeniatankmix.com.

The Engenia™ herbicide main label for conventional uses specifies to use Extremely Coarse (XC) to Ultra Coarse (UC)  spray droplets with a minimum flow rate of 0.30 US GPM below a maximum speed of 15 MPH.

The main label specification for conventional (non-dicamba tolerant) would account for the following Wilger Tip-Cap sizes (i.e. -05) and series (i.e. MR):

Note: All pressures shown below are the pressure at the tip, not gauge pressure.

MR Spray Tip Series

For MR110-05; operating ≤28 PSI

MR110-06 to MR110-10; operating ≤48PSI

MR110-125 -MR110-20: operating ≤85PSI

Are the Tip-Caps Pulse Width Modulation (PWM) Compatible? Yes

 

DR Spray Tip Series

For DR110-03; operating ≤28 PSI

For DR110-04; operating ≤38 PSI

DR110-05 to DR110-20; operating ≤85PSI

Are the Tip-Caps Pulse Width Modulation (PWM) Compatible? Yes

Engenia™ Herbicide on Dicamba-Tolerant Crops

The below information is specific to the supplementary label, relating to the use of Engenia™ Herbicide on dicamba-tolerant cropls ONLY.

Pulse Width Modulation (PWM) Spray Tip Charts for Spraying Engenia™ Herbicide on Dicamba-Tolerant Crops – Based on Approved Nozzle list @ www.EngeniaTankMix.com
Spray tip charts for Engenia™ Herbicide for PWM spray systems, including Case AimCommand, Capstan Sharpshooter, Pinpoint, Raven Hawkeye

For a reference of some other label information, it can be retrieved from HERE (BASF Engenia™ website). For the most current information on approved nozzles for use with Engenia™ herbicide on dicamba-tolerant crops, visit www.engeniatankmix.com.

Engenia™ is a trademark of BASF.

TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BASF MAKES NO RECOMMENDATION OR WARRANTY HEREIN REGARDING THE USE OF ANY PRODUCT THAT MAY APPEAR ON THIS WEBSITE, REGARDLESS OF WHETHER SUCH PRODUCT IS USED ALONE OR WITH ENGENIA™. BUYER AND ALL USERS ARE SOLELY RESPONSIBLE FOR ANY LACK OF PERFORMANCE, LOSS, OR DAMAGE IN CONNECTION WITH THE USE OR HANDLING OF ANY SUCH PRODUCT ALONE OR WITH ENGENIA™. REFER TO LOCAL LEGISLATION FOR ANY ADDITIONAL RESTRICTIONS OR REQUIREMENTS ON CHEMICAL APPLICATIONS.  See container and supplemental labeling for additional information.
Contact Wilger

Have a question? Find a broken link on the website and need more information? Email us directly, and we can personally help you out.

Not readable? Change text.

Start typing and press Enter to search